 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » reliableapp |
| View Profile: reliableapp | |||||
|
|||||
How to access dispenser control board on WP fridge - How to access dispenser control board on WP fridgeThe diagram for this unit does not show any visible clips or screws holding on the faceplate for the dispenser board. I want to be cautious in removing it, as those parts are not currently available.... |
|
Oven loses temperature after 25 minutes - Oven loses temperature after 25 minutes Customer reported that gas oven was not heating to proper temp. Setting would say '475' but oven would be much lower than that - never reaching true temp. My first thought was that the sensor was bad... |
|
Need help wiring infinite switch in - Need help wiring infinite switch in Got replacement switch for WB24t10015, but the instructions in bag are for ERC replacement. Lost as to what goes where since GE changed to WB24t10063. Can anyone assist with proper wire placement?... |
|
Hotpoint oven -new control board wires dont match - Thanks for the thoughts Thanks for your thoughts on the subject of mis-labeled wires. Obviously, I have since moved forward in the 2 years since my post, but I am glad to know I was not the only one thrown by this issue. |
|
Across the front WP icemaker stopped making ice after 3 days - Across the front WP icemaker stopped making ice after 3 days Across-the-front ice maker stoppped working. No water in tray. Ran a harvest cycle, and water filled the tray. After that, no more ice again. Installed new ice maker, and got ice for 3 days, then... |
|
Hotpoint oven -new control board wires dont match - Hotpoint oven -new control board wires dont match Got the new control board (WB27K10027), but no instructions for installation. The old board had 5 wires to it, the new one has 6. Don't want to blow the new board, but I am lost as to what goes where. |
| Forum Info | Contact Info | |
|
Join Date: 05-04-2009
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
