 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » regiemister@hotmail.com |
| View Profile: regiemister@hotmail.com | |||||
|
|||||
water backing up in the lower half of refrig. - water backing up in the lower half of refrig.The top part of the freezer still freezes as norm, but water runs back into the refridgerator portion alot. What's causing this? |
|
oven gets to a certain temp and shuts down (shows errors in window) - water backing up in the lower half of refrig. Would I be correct in assuming the oven sensor is also the thermal coupling, the line that runs from the broiler up into the oven with the little rounded tip? |
|
oven gets to a certain temp and shuts down (shows errors in window) - water backing up in the lower half of refrig. When we set the oven to bake, in about a 10-20 seconds, the beepuing starts and the error codes appear. There is no glowing, no response by the igniter when in any mode the oven is set in. So, I'm... |
|
oven gets to a certain temp and shuts down (shows errors in window) - water backing up in the lower half of refrig. After looking again for the model number on the aluminum sheet, I can only identify these 5 numbers (20728). Is there anywhere else besides the bottom door frame is the model number displayed... |
|
oven gets to a certain temp and shuts down (shows errors in window) - oven gets to certain temp and shuts down shows error After looking at the oven igniter, the burner in the oven never lights, the gas doesn't even come through the oven. The eyes on the top gets gas but the oven don't. So, disregard the part about the... |
|
oven gets to a certain temp and shuts down (shows errors in window) - oven gets to a certain temperature/shutsdown and shows error in window The error codes are F2&F3, with F2 being the most frequent. Thanks for the reply. Regie |
|
oven gets to a certain temp and shuts down (shows errors in window) - oven gets to a certain temp and shuts down (shows errors in window) I have a gas Roper, when the oven temperature is set, it starts to warm-up and about 3 minutes into the process it starts to beep and the display show an error. So we cut it off and try again and... |
| Forum Info | Contact Info | |
|
Join Date: 07-26-2007
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
