Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > View Profile » Qtip

View Profile: Qtip
Qtip is on a distinguished road
Qtip Qtip is offline
Member
 
Last Activity: Yesterday 10:00 PM 

whirlpool gas dryer
Clean the vent hose completely and see if that helps - sounds like it could be due to restricted airflow. In electric dryers i would suggest taking the vent hose off for one load but you definitely...
dryer wont get hot, new element & therm on element
There is also whats called a Thermal fuse (rectangular white fuse with 2 wires going to it) and that fuse is designed to blow out first to save the heating element and thermostat. check the thermal...
roper washer
Probably a bad fill valve
replacing broiling element
Yeah but first make sure the oven in unplugged or at least have the breaker turned off if its built in and u cant get to the plug easily. after the two screws are removed it will pull right out along...
Squeeling Dryer
I would start by checking the Idler pulley (pulley that sits near motor on bottom of dryer that holds the belt in place)
Dryer staying hot when not running
Did that help or was that not the problem??
starter on ge dryer wont start the machine
Open the door and hold down the door switch and hold the start switch down and turn the drum manually all at the same time and see if that gets it going. if so then the motor is going bad
Forum Info Contact Info
Join Date: 11-02-2009
Posts
Total Posts: 34 (1.79 posts per day)
Last Post:
starter on ge dryer wont start the machine
11-18-2009 07:31 PM
Find all posts by Qtip
Find all threads started by Qtip
Referrals: 0
Qtip has no contact information.
Additional Information Group Memberships
N/A
Qtip is not a member of any public groups


All times are GMT -7. The time now is 08:32 PM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.0.0

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16