Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > View Profile » plink49

View Profile: plink49
plink49 is on a distinguished road
plink49 plink49 is offline
Junior Member
 
Last Activity: 10-05-2016 09:21 AM 

No cooling after power surge this morning
Could it be the starter relay was zapped in the power surge? I see not much else it could be in such a simple refrigerator. Can the compressor itself be damaged in a surge?
No cooling after power surge this morning - No cooling after power surge this morning
We had a power surge this morning and i later discovered that our garage r/f is no longer working. The fan is running but the compressor isn't. This was a cheap second unit and I'm wondering if...
Help - instructions to install oven igniter - No cooling after power surge this morning
Thanks Gene,

Other than the fact that whoever designed the location of the mounting bracket for the burner should be put in front of a tribunal, the replacement of the igniter went very smoothly. ...
Help - instructions to install oven igniter - No cooling after power surge this morning
I'm also having to replace the oven igniter on the XL44. My range is a Hotpoint RGB745WEA1WW. When I remove the oven floor I can easily see the igniter attached to the burner but I can't get to the...
drain water leak at air gap - No cooling after power surge this morning
Thanks for the input! I couldn't find any kinks or blockages, but I replaced the hose with a much shorter one with no loop in it and provided a more direct route to the "tee" connection in the sink...
drain water leak at air gap - drain water leak at air gap
Dishwasher runs and cleans just fine, but during the drain cycle water leaks quite profusely from the air gap. Since the air gap is such a cheap part I replaced it but to no avail. Also, there is...
Forum Info Contact Info
Join Date: 08-07-2008
Posts
Total Posts: 6 (0.00 posts per day)
Last Post:
drain water leak at air gap
08-07-2008 11:40 AM
Find all posts by plink49
Find all threads started by plink49
Referrals: 0
plink49 has no contact information.
Additional Information Group Memberships
N/A
plink49 is not a member of any public groups


All times are GMT -7. The time now is 11:02 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17