Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > View Profile » Paul Briant

View Profile: Paul Briant
Paul Briant is on a distinguished road
Paul Briant Paul Briant is offline
Junior Member
 
Last Activity: 05-27-2013 08:45 PM 

Water level selector dial stripped - Water level selector dial stripped
The far left of the 3 dials-- the one that selects the load size and hence the water level-- seems to be stripped. It used to make clicks when turned, but hardly clicks any more and always fills to...
Oven Buttons not working and igniter problem - I'll have to check that
Shoot-- I was hoping to avoid having it take it apart to that extent. I guess the whole top will have to come off to access that.
Oven Buttons not working and igniter problem - I'll have to check that
Anybody out there? I ordered the Spark Module (called Gas Re-Igniter on part label), but it did not fix the problem. Still won't ignite on that burner, and if we light it with a match, it just keeps...
Oven Buttons not working and igniter problem - Spark Module/ Gas Re-Igniter
Hi Gene,
I got the parts and installed them. Panel works perfectly.
The part you called "Spark Module" (labeled "Gas Re-Igniter", but it is indeed the part you posted photo of), however, did not fix...
Oven Buttons not working and igniter problem - Thanks-- ordered the parts
Thanks Gene-- Fortunatly, I had not yet purchased that other part that you advised me was wrong. That was the part number Jenn-Air told me was for the control panel. I'm glad I didn't order from...
Oven Buttons not working and igniter problem - Updated Model Number
OK-- got the right model number.
It's JGS8860BDP

Part# for panel is 8507P229-60

I have replaced the igniter in the past, by the way, and it didn't solve the problem with that. Still does the same...
Oven Buttons not working and igniter problem - Oven Buttons not working and igniter problem
Hi,
I purchased this Jenn Air Updraft Gas Slide-In Range at a "scratch and dent" store. It appeared not to have ever been used, as was claimed, and had some minor cosmetic damage. It worked fine the...
Forum Info Contact Info
Join Date: 04-14-2013
Posts
Total Posts: 7 (0.01 posts per day)
Last Post:
Oven Buttons not working and igniter problem
04-14-2013 12:31 PM
Find all posts by Paul Briant
Find all threads started by Paul Briant
Referrals: 0
Paul Briant has no contact information.
Additional Information Group Memberships
N/A
Paul Briant is not a member of any public groups


All times are GMT -7. The time now is 09:56 PM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17