 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » onehotpny |
| View Profile: onehotpny | |||||
|
|||||
ge wall oven wont heat upHave you tried ohming out elements? need more info like model # and what you have tried so far. |
|
Oven is not working No problem, good luck on removing the over lay. long as you take your time you should have no problem getting it off. glad to help |
|
Oven is not working far as the overlay , you can take a hair dryer and heat the over lay on the old, the glue on the back will will get hot enough to pull the over lay off and reuse it on the new control board. just be... |
|
Maytag overhead oven control board Thanks Gene. Looks like Robert Shaw ( manufacturer of oven board) is slacking on their quality control. Thanks for the help. |
|
Maytag overhead oven control board Hi, wouldn't this be the same as the oven control board that I've already replaced and found to be bad? So could I be right that the part I replaced is a bad part? |
|
Maytag overhead oven control board Hi, this oven only has one control board. the oven control board is one complete unit. there isn't any other electronic part on the oven. I can take picture of the inside of the unit if needed and... |
|
Maytag overhead oven control board This oven doesn't have the self cleaning feature. if that helps at all. |
| Forum Info | Contact Info | |
|
Join Date: 05-17-2010
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
