Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > View Profile » Ocdryer

View Profile: Ocdryer
Ocdryer is on a distinguished road
Ocdryer Ocdryer is offline
Junior Member
 
Last Activity: 02-17-2017 12:56 AM 

Admiral gas dryer little flame at spreader, then flame at air mix port only
Gas company came out. Very little gas at the wall valve. They inspected further and turns out an underground leak.

Thanks for the input. When in doubt check the wall gas valve.
Admiral gas dryer little flame at spreader, then flame at air mix port only
Thanks.

Natural gas.

Have not tested gas pressure. Don't have that reader and a tapped cap like the one in the Video.

I straightened the coil like gas pipe from the wall valve to the dryer....
Admiral gas dryer little flame at spreader, then flame at air mix port only - Admiral gas dryer little flame at spreader, then flame at air mix port only
Hello folks. Thanks in advance for reading.

Symptom: when on auto sensing the timer won't progress and end its own cycle. Took 5 hours to dry a load. When I push start on the timed high heat...
Forum Info Contact Info
Join Date: 02-15-2017
Posts
Total Posts: 3 (0.37 posts per day)
Last Post:
Admiral gas dryer little flame at spreader, then flame at air mix port only
02-15-2017 10:59 PM
Find all posts by Ocdryer
Find all threads started by Ocdryer
Referrals: 0
Ocdryer has no contact information.
Additional Information Group Memberships
N/A
Ocdryer is not a member of any public groups


All times are GMT -7. The time now is 11:43 PM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17