 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Neal |
| View Profile: Neal | |||||
|
|||||
Kenmore doesn't clean-"Clean " Flashning Seven timesThanks you everyones input. I'm not going to fix it. Tired of fooling with it after 3 weeks. I'm going to replace the unit with another one. Thanks |
|
Kenmore doesn't clean-"Clean " Flashning Seven times No I didn't. I check everything at the control board, The back off the connector. |
|
Kenmore doesn't clean-"Clean " Flashning Seven times The best I can tell is this, I have 120volts on the one leg at the control board for the motor and not the other. I didn't check down at the capacitor. So would mean the motor is shot? |
|
Kenmore doesn't clean-"Clean " Flashning Seven times Ok, This is the latest. Double checked all connections. Everything looks good. Went to run quick rinse, The clock indexed on the face for awhile, It had filled with water. But the motor didn't run.... |
|
Kenmore doesn't clean-"Clean " Flashning Seven times The clock or face index's, you can hear the pump run to fill the tub and heat up. Then it would seem to "wash" then empty. The arm on the bottom doesn't rotate. It's in the same place every time you... |
|
Kenmore doesn't clean-"Clean " Flashning Seven times Feel real stipud! Must of not had the one lead on correctly. Was not on. Header gets hot now. But the motor doesn't run, is there a fuse that might of blown when I switched the control? |
| Forum Info | Contact Info | |
|
Join Date: 12-27-2007
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
