 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » MicrowaveDisplaydotcom |
| View Profile: MicrowaveDisplaydotcom | |||||
|
|||||
Microwave timer works, no heat or turntableThey'll put up with the arcing for a while, but it greatly shortens their lives. I did not mean to imply that they're as sensitive as it may have come across. |
|
Microwave timer works, no heat or turntable This seems like an older model and it may have just been normal aging, but I always advise folks not to open the door while it's cooking, but to hit the "Stop" pad first. The switches will of course... |
|
Microwave timer works, no heat or turntable Ugh. You're right. I realize now I didn't read your initial post quite clearly enough, so I can see how it would have been the primary interlock in this case. It is a good idea to replace both the... |
|
Panasonic starts then stops Diagnosing Panasonic microwave oven stoppages: If it stops after 22 seconds, that means the controller has detected a problem, usually a problem with the inverter, controller, magnetron, or a bad... |
|
runs for about 3 seconds and shuts off The definitive guide to testing and diagnosing a "noisy" magnetron (the cause of your woes) is here (http://www.fixya.com/support/t2330691-ge_spacesaver_jvm1650sh01_shuts_off). Other "fixes" may... |
|
microwave That would be a bad bottom door switch or its mount is broken or loose. See our help file on door switches here (http://031d26d.namesecurehost.com/mwd/doorsw.txt). The service manuals for these... |
|
Microwave timer works, no heat or turntable Check the technical sheet or schematic hidden inside the oven. You can see a distorted scan of the overall schematic here... |
| Forum Info | Contact Info | ||||
|
Join Date: 01-01-2012
Referrals: 0
|
|
||||
| Additional Information | Group Memberships | ||||
|
|
