| Register | FAQ's | New Posts | Today's Posts | Extras |
| » mdg224 |
| View Profile: mdg224 | |||||
|
|||||
|
i checked out fan runs 120 volts at compressor no continuity between ground and compressor continuityof 10oms between the pins my question is before i order a overload is there a test for the over... |
|
have a roper fridge that wasnt cooling properly thought it was a deforst isssue so let it defrost over night. upon start up i heard the compressor start it cooled for about two hours then stop i... |
|
i have a maytage dishwasher that i started a normal cycle on and after the first wash it didn't drain. i cancled and started a new cycle and the pump does't run but the display counts down as if it... |
|
i've got a kenmore dishwasher that the top propeller does not rotate during the wash cycle. the bottom one does and the top move freely but no water seem to get to it. the tube is not blocked as i... |
|
Answer by: MMH EXPERT_SD, Unknown There is an adjustment knob located on the side of the housing. I'm sending you a picture with instructions. The ideal fill time for this is 7.5 seconds with a 4.5... |
|
i have a kenmore side by side model 10652012104 the ice maker constantly over fills how do i adjust |
|
The Light Does Work In The Dryer, Open Its On, Closed Its Off. The Circuit Breaker Has Power On Both Sides |
| Forum Info | Contact Info | |
|
Join Date: 12-25-2008
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|