| Register | FAQ's | New Posts | Today's Posts | Extras |
| » mbrahmer |
| View Profile: mbrahmer | |||||
|
|||||
|
Thanks Gene. I just ordered the parts! Also found the RMA for the FF fan I ordered by mistake. Thank you! Mark |
|
Gene, The frige is working well over the weekend FF @ 37 and FZ @ 0. What do you think? The latest numbers are: frige @40 Freezer @ -4 and fan over evap not running; coils are frosted. Thanks, Mark |
|
Will do. I have reassembled the FF side and left the freezer apart. Since the evap fan was not running and now it has been for about 24 hours, would you recommend I replace it? Thanks, Mark |
|
Gene, The evap coils have a nice uniform light layer of frost on them this morning; temps in the freezer=0, temp in frige=36. I need to send the custom cool fan & harness back since I didn't need... |
|
Gene, I got the evaporator motor test done: voltages are good. When I plugged the motor back in it started running; probably still need to replace it?? Other problem is that the fan in the custom... |
|
Sorry, I missed your last post. I'd say that some air could get past the coils. Most of the rest of them were clean. Mark |
|
Not that bad. I used a hair dryer and the ice melted very quickly. Mark |
| Forum Info | Contact Info | |
|
Join Date: 05-16-2012
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|