 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » mattsse |
| View Profile: mattsse | |||||
|
|||||
Broken Dishwasher - Again - WiresI searched around and found that if you didn't replace the wires with the new wires that came with the thermal fuse that could be the problem - well I didn't replace them. I didn't see why I would... |
|
Broken Dishwasher - Again - Broken Dishwasher - Again Well the dishwasher won't power on again. About 2 weeks ago the thermal fuse blew, I replaced it ($35) and guess what? It blew again :( Is there anything I can do or should I just scrap this... |
|
Kenmore Oven - Glass Top - Broken Dishwasher - Again Ok, I got the burner disconnected. I pulled the red wire and black wire to the board in the above picture, I taped them up with electrical tape and tucked them in. The front burner no longer works,... |
|
Kenmore Oven - Glass Top - Broken Dishwasher - Again I've confirmed the recall work has been done, now I think I need part # 316441814 I just want to disconnect the burner, what's the easiest way to do that? Take off the glass top and just pull the... |
|
Kenmore Oven - Glass Top - Kenmore Oven - Glass Top Hello all! I have a kenmore stove and today the large burner on the front right of the glass top decided to come on full blast and stay on full blast. All I could do was shut the breaker off. I... |
|
Kenmore Elite (Whirlpool) 6yrs old Door Alignment - Kenmore Elite (Whirlpool) 6yrs old Door Alignment My door is leaking on the left side, and I know why, the door is out of aligment. On the right side the door metal lines up perfectly with the door seal, on the left side it almost completely misses... |
| Forum Info | Contact Info | |
|
Join Date: 08-18-2012
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
