Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > View Profile » manfred63

View Profile: manfred63
manfred63 is on a distinguished road
manfred63 manfred63 is offline
Junior Member
Last Activity: 05-16-2017 02:54 PM 

What is this tube for? GTUP270EM4WW
That is the pressure sensor tube. Air pressure in the hose changes as the water fills. The other end of that tube attaches to the water level selector switch on the control panel. If either end is...
washer drum dosent turn smoothly
It could be the tub bearing, or it could be the suspension rods springs have worn out and the bottom of the transmission pulley is rubbing on the machine base when has a full load. Open the front...
Amana Dryer not heating
This dryer style, made by Whirlpool, has a timer that commonly burns out a connection that causes the dryer to no longer have heat. Here is a link to my video showing how to do a temporary repair,...
Amana washer spins for a second then binds
The water pump on these models commonly goes bad and causes the symptoms you described. There is a shim that the pulley on the pump throws up against the base of the pump, which causes enough drag...
whirlpool Ultimate Care II
Sounds like either the pump is too hard to spin, such as the middle part that spins the impeller is stuck or frozen somewhat in place. OR, it could be a bad capacitor. Remove the water pump from...
dryer heating element is drying very hot burning cloths and wont turn off
Sounds like the element might be broken and the coil wire has shorted to ground, causing it to heat all the time. UNplug dryer, remove element, and inspect it for any broken coils. Here is a video...
Whirlpool washer tub wont agitate or spin
Sounds like the coupling between the motor and transmission shafts is broken. You will have to unplug machine, remove cabinet, and then remove water pump from the motor, then unplug motor and remove...
Forum Info Contact Info
Join Date: 07-31-2009
Total Posts: 18 (0.01 posts per day)
Last Post:
Whirlpool washer tub wont agitate or spin
04-07-2017 12:02 PM
Find all posts by manfred63
Find all threads started by manfred63
Referrals: 0
manfred63 has no contact information.
Additional Information Group Memberships
manfred63 is not a member of any public groups

All times are GMT -7. The time now is 03:28 PM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17