roper dryer
Longer drying times are an indication of clogged or restricted ventilation. If allowed to continue long, the high limit thermostat or the thermal fuse can open; then you'll have no heat.
|
|
|
|
|
Whirlpool Door leaking
Yes. And make sure it is clean. Food and soap residue can cause the seal to be open at those spots. If it leaks after a good cleaning, you can replace it. Here's the part number. AP4310431
|
Maytag Atlantis water fill problem
The temperature changes are normal: They're controlled by the thermistor, which sends the water inlet temperature to the control board. The board, then, controls the temperature by adjusting the...
|
Control Board Not Working
Unplug the unit and access the board to inspect for any evidence of component damage (like a burnt or discolored resistor). If there is, replace the control. If not, check the power at the outlet. If...
|
Water leaks when water is fed into the basin
Open the door and remove the hinge screws. DON'T remove the door. Remove the screws on the brackets directly across the opening from the hinges. You don't need to remove the brackets, but it's OK if...
|
All times are GMT -7. The time now is 09:08 PM.
The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc.