 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » LesterS |
| View Profile: LesterS | |||||
|
|||||
Dryer won't startok, all parts checked ok....the wires and terminals on the timer were all clearly marked so it was easy to test it for continuity at Y-BG. then I noticed that I had power (115V) at the main on off... |
|
Dryer won't start thank you, will double check, but according to my past checks, as indicated in previous posts, the thermal fuse, door switch and main on/off switch are all ok...that leaves the timer. hopefully I... |
|
Dryer won't start attached is the wiring diagram......power (115v) is present into and out of the thermal fuse and the door switch |
|
Dryer won't start ok no problem.....the door switch is in tact and good. the timer has about 5 terminals on it, how do I check them for continuity? when I checked them for voltage, they all showed approx 9.5v except... |
|
Dryer won't start - Dryer won't start I'm not an electrician so my terminology might not be precise, I'll try to explain better what I did......with the machine plugged in and both wire leads attached to the thermal fuse, I checked each... |
|
Dryer won't start - Dryer won't start dryer is from 1982, they don't make 'em like this anymore! there is full voltage (115v) at both terminals of the thermal fuse located in lint exhaust duct and at both terminals of the door switch. no... |
| Forum Info | Contact Info | |
|
Join Date: 10-28-2010
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
