Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > View Profile » Lawnboy

View Profile: Lawnboy
Lawnboy is on a distinguished road
Lawnboy Lawnboy is offline
Junior Member
Last Activity: 06-26-2008 09:44 AM 

Maytag makes noise while spinning
I hear ya. People don't have a problem buying something new but when repairs are needed (and if mechanical it will need service eventually) they will choose the cheapest parts and minimal service...
Maytag makes noise while spinning
Okay, problem solved. I ended up cutting the old bearing off with a dremel cutting tool. I would not recommend this approach as it is time consuming. In the "lessons learned"" section I would...
Maytag makes noise while spinning
Thanks for sticking with me on this one. I tried an air hammer and cutting tool to no avail. Just dulled the tool. I used a deep socket on the shaft and hit it with a hammer a few times, didn't...
Maytag makes noise while spinning
I tried some heat, didn't work. Do you have any ideas that will get this bugger off? Do I have to take the shaft out? I am almost out of patience. I have to believe this is not an isolated...
Maytag makes noise while spinning
Wobbles all over the place as it is grinding. Some of the bearings are even flat.
Maytag makes noise while spinning
Yup, that's the wrench. I went against the experts advice and gave the brake a "whack" in the other direction. Came loose right away. Now, the next issue is the bearing is shot, but will not come...
Maytag makes noise while spinning
I did remove the drive belt and ran it through the spin cycle as suggested. No noise so I can rule out the water pump. Adding to my preivious post, is there a special process for removing the brake...
Forum Info Contact Info
Join Date: 04-08-2008
Total Posts: 13 (0.00 posts per day)
Last Post:
Maytag makes noise while spinning
04-09-2008 12:07 PM
Find all posts by Lawnboy
Find all threads started by Lawnboy
Referrals: 0
Lawnboy has no contact information.
Additional Information Group Memberships
Lawnboy is not a member of any public groups

All times are GMT -7. The time now is 06:42 PM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17