| Register | FAQ's | New Posts | Today's Posts | Extras |
| » keerc |
| View Profile: keerc | |||||
|
|||||
|
My freezer is only cooling to 44F. One corner very quickly frosts over and accumulates large amounts of frost. I checked the lid seal and it's good. I bypassed the thermostat and that made no... |
|
My Kenmore 15 chest freezer (about 20 years old) is only cooling to 39F degrees. I defrosted it and no change. I bypassed the thermostat by plugging a wire to join the two terminals that plug into... |
|
My Kenmore 15 chest freezer (about 20 years old) is only cooling to 39F degrees. I defrosted it and no change. I bypassed the thermostat by plugging a wire to join the two terminals that plug into... |
|
Thanks again Eric for the excellent reply. Your two replies are the best I've seen on this topic on the net and I wonder if there is a way to flag this thread for reference for others with this same... |
|
Great post, thanks! It looks like the belt is loose and is slipping. Is there a way to tighten the belt or do I just replace it so the new belt would be the right size and so no longer loose? |
|
I have a toploading GE clothes washer model wksr2100t. It has been leaving the clothes wet, so I watched it cycle, and it did spin great during midcycle removing all excess water from the clothes,... |
| Forum Info | Contact Info | |
|
Join Date: 11-08-2012
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|