Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > View Profile » juntjoo

View Profile: juntjoo
juntjoo is on a distinguished road
juntjoo juntjoo is offline
Junior Member
 
Last Activity: 10-11-2017 05:39 AM 

GE Prodigy agitates but won't proceed to spin/drain - GE Prodigy agitates but won't proceed to spin/drain
It makes a slight buzzing sound while stuck after agitating waiting to spin. What is the first two or three troubleshooting steps? This just started happening after the power turned back on after...
GE Prodigy agitates but won't proceed to spin/drain - GE Prodigy agitates but won't proceed to spin/drain
IDK if this recent power outage from hurricane Irma had anything to do with it but after power was restored this happened. And it hums or grumbles or vibrates or a combination of all those as if to...
Condenser causes breaker to trip. Continuity reads 2.9ohms across all & ground - GE Prodigy agitates but won't proceed to spin/drain
Yes, thanks. Got my compressor and refrigerant replaced.
Condenser causes breaker to trip. Continuity reads 2.9ohms across all & ground - Condenser causes breaker to trip. Continuity reads 2.9ohms across all & ground
What does this mean? Sounds good right? I read I believe if the readings are the same it's a 3 phase system(?). Main breaker IMMEDIATELY trips when condenser is connected. Hoping to get some...
AC trips breaker when condenser is connected - AC trips breaker when condenser is connected
I tested the continuity between all the terminals, and for the fan also, and all readings resulted in 2.9ohms if I read it correctly. I was following some articles online and YouTube. Anyway, not...
Dryer will not heat, timer does not work - AC trips breaker when condenser is connected
So I've got proper voltage and when in timer mode it trips up the circuit breaker, it drops to like 20v and I have to reset it, put it in energy savings mode and it works. So what's that mean, in...
Dryer will not heat, timer does not work - AC trips breaker when condenser is connected
I've the exact same problem. How did you ever solve it? I'll try the troubleshooting steps the other guy/gal suggested but my issue is with it in timer mode.
Forum Info Contact Info
Join Date: 11-24-2015
Posts
Total Posts: 7 (0.01 posts per day)
Last Post:
Dryer will not heat, timer does not work
11-24-2015 06:09 PM
Find all posts by juntjoo
Find all threads started by juntjoo
Referrals: 0
juntjoo has no contact information.
Additional Information Group Memberships
N/A
juntjoo is not a member of any public groups


All times are GMT -7. The time now is 02:54 PM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17