![]() |
Register | FAQ's | New Posts | Today's Posts | Extras |
» jsolo53 |
View Profile: jsolo53 | |||||
|
![]() Thank you!!! I ordered a coupler on Friday, received and installed it today, Monday, and the washer just finished its first post-repair load. The video took all the anxiety out of the repair. You... |
![]() This top load Whirlpool was fine until today. The tub fills with water but the agitator doesn't turn and the tub doesn't spin. Water drains fine. I can hear and feel the motor running. I can also... |
![]() The problem I'm having is with the broiler in the lower oven of our GE Spacemaker Cooking Center. One area on the old broiler element turned red and then the element broke in two at that spot. I... |
![]() Thanks you for the info. The unit is working fine again. Turns out the problem was calcium or mineral deposits built up on the dispenser slider, pivot, ratiner and latch, causing it to bind. Took... |
![]() This dishwasher has been trouble free until the soap dispenser door stopped opening. I've read in previous posts that replacing the wax motor usually fixes this. Not this time. After installing a... |
![]() I was wrong about the water level switch. With air pressure applied, there is continuity accross the left and right legs. Behaves just like the new one. I'll have to return the new switch. I have... |
![]() I pulled the water level switch. There is continuity accross the center pin and the right pin but not the left pin, and there is no continuity accross the left and right pins. With air pressure... |
Forum Info | Contact Info | |
Join Date: 09-20-2009
Referrals: 0
|
|
|
Additional Information | Group Memberships | |
N/A
|
|