 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » jroske |
| View Profile: jroske | |||||
|
|||||
Dishwasher does not finish cycle - Dishwasher does not finish cycleThe wash cycle works but then stops. Not sure if the rinse cycle is working but When it is done washing (or rinsing) the indicators lights go off. Normally it would indicate drying or complete. The... |
|
WhirlPool Washer - Dishwasher does not finish cycle Mine is a Kenmore/Whirlpool doing the same thing. I have replaced the capacitor and have had two motors sent from APP with no change. All the thing will do is sit and buzz. |
|
Washer will not Spin.. - Dishwasher does not finish cycle The motors will not start while they are off the machine with the timer in the spin cycle but will engage most of the time in the agitation cycle. |
|
Washer will not Spin.. - Dishwasher does not finish cycle All three motors (1 old, 2 new)turn freely but there is more resistance when I attempt to "spin start" it with the power applied. Could the switch be bad? |
|
Washer will not Spin.. - Dishwasher does not finish cycle Installed the capacitor and the motor will just sit and buzz on the spin cycle. Agitate cycle does work. Could the timer be bad? What are the odds of receiving 2 bad motors? |
|
Washer will not Spin.. - Dishwasher does not finish cycle I found the Capacitor. Our local shop has one in stock. I have 2 "new" motors on hand so I will give it a shot. Thanks for your help so far. |
|
Washer will not Spin.. - Dishwasher does not finish cycle The lid switch is working because it will not to anything unless it is pressed. The motor has been off during the test. The motor also has a connector to only connect one way. Is the starter... |
| Forum Info | Contact Info | |
|
Join Date: 02-18-2010
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
