 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Joseph A Stanko |
| View Profile: Joseph A Stanko | |||||
|
|||||
F71 Code, User Interface HeartBeat Failure - F71 Code, User Interface HeartBeat FailureWasher is behaving erratically. Sometimes it completes all cycles. But most of the time it seems to fail between the Rinse and the final highspeed spinnout. I read over the diagnostic guide and... |
|
E59 Error Code, No Tach Signal in 3 sec - F71 Code, User Interface HeartBeat Failure Dear Simon, I am so excited. Got the washer working again. Your last suggestion above worked! In anticipation of having to order a new motor control board, after eliminating the motor as the... |
|
E59 Error Code, No Tach Signal in 3 sec - F71 Code, User Interface HeartBeat Failure Dear Simon, Thank you for replying. I followed your advice and cleaned the contacts on the motor, where the 5-pin cable from the motor controller board plugs in, but the motor still does not budge... |
|
kenmore he3t, error code f28 - Congratulations on solving your problem;could you look at mine? Hi bleonard: Glad to see you resolved the problem with your motor by your finding that it was actually the motor control board not the motor. You seem to understand the test procedures for washer... |
|
E59 Error Code, No Tach Signal in 3 sec - E59 Error Code, No Tach Signal in 3 sec Our Kenmore front loading washer failed to spin on the final spin cycle. I followed the diagnostic procedures and retreived the above error code, E59, no tach signal in 3 seconds. The instructions... |
| Forum Info | Contact Info | |
|
Join Date: 11-29-2012
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
