 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » jordankeck |
| View Profile: jordankeck | |||||
|
|||||
GE WSXH208 Will Not Fill Tub Except on Heavy CottonVery odd indeed! Would you suggest I pick up a board from this site and try it since I can return it if it does not work? I believe this is the correct board for my application: GE WH12X10154... |
|
GE WSXH208 Will Not Fill Tub Except on Heavy Cotton Well I have now installed a brand new circuit board and a brand new timer in the washer, and I still do not have the washer working. I took the washer to my local repair shop and even they are... |
|
GE WSXH208 Will Not Fill Tub Except on Heavy Cotton So I checked the voltage across Pins 5 of the 6-pin and 10-pin connector once the washer stops, and I see no voltage at that point. According to the service manual, this means that the circuit board... |
|
GE WSXH208 Will Not Fill Tub Except on Heavy Cotton sidfink43, thanks for the link and tips! I pulled up the PDF of that service manual and noticed a section titled "Timer does not advance." In the troubleshooting there is a method for checking... |
|
GE WSXH208 Will Not Fill Tub Except on Heavy Cotton - GE WSXH208 Will Not Fill Tub Except on Heavy Cotton I bought a used GE WSXH208A1WW that has a couple of quirky issues. The first is that tub will only fill with water when you start on the Heavy Cottons cycle first. Medium and Light Cottons will not... |
| Forum Info | Contact Info | |||
|
Join Date: 02-16-2013
Referrals: 0
|
|
|||
| Additional Information | Group Memberships | |||
|
|
