| Register | FAQ's | New Posts | Today's Posts | Extras |
| » johnmou |
| View Profile: johnmou | |||||
|
|||||
|
GE Profile Harmony Gas Dryer - 1. I strart with no air blow. 2. Found out the "Field Service Mode" to diagnose the problem, show message "...blower motor not get up speed...." 3. Open up check all... |
|
just copy from another site : Best Solution posted on Apr 23, 2009 http://www.fixya.com/images/icons/4%20ratings_thumbs.gif http://www.fixya.com/Uploads/Avatars/A4D35EA.JPG... |
|
1. The original problem start from no heat and no air blow. 2. I found out there is a "Field Service Mode" to diagnose the possible problem. and came up "....blow motor not up to speed..." message.... |
|
answer provide by http://www.fixya.com/users/jeryflores Are you having problems with your GE Profile Harmony but don't know where to start to troubleshoot? Let the dryer do it for you, here's... |
|
The dryer is not blowing any air and is not heating up. Even in Air Dry mode has no air. The drum is still working and all other electronics are working. How can I tell which parts might be the... |
|
Its really a bad design - If yours still working, seal the top of membrance to the panel to prevent any moisture or liquid go behind the membrance. See the attached link for "Service... |
|
Hi WAG2170, Do you want to sell me the circuit board if that work on my range? parts #9760013. and did you replace the touch panel yet? is that work? I might has the same problem as yours. |
| Forum Info | Contact Info | |
|
Join Date: 07-12-2008
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|