| Register | FAQ's | New Posts | Today's Posts | Extras |
| » jim_c |
| View Profile: jim_c | |||||
|
|||||
|
hello, I have maytag side by side, I get water that will leaks from the freezer at the bottom between the gasket and the freezer. I geta pretty good size puddle. I have noticed I will get ice... |
|
Hi again I have installed the 200 ohm 10 watt resistor, when I push start/stop switch machine will begin to fill with water and stop after minute or two, it will do this thru entire wash cycle,... |
|
hi again I have my 200 ohm 10 watt resistor, I understand I need to connect 1 end of the resistor to the P7-4, the other end needs to connect to the black wire on start/stop switch theres two black... |
|
They say I need to install 200 ohm 10 watt resistor . Where would I get this at. Site did not say where I could buy this item. thanks for the help jimc |
|
when I did the r11 q6 repair it camewith the waxmotor ,door light bulb. Ater I performed this R11/Q6 repair it would go to the spin cycle probably every other load, sometimes I would turn the dial... |
|
I have a maytag neptune clothes washer for some reason the machine will not go to the speed spin cycle at the end of wash. I have already checked to make sure it is level,checked drain pumpand hose... |
|
Thanks for the feedback on my question, I checked to see if the drain hose is plugged that seems to be ok, I removed the drain tube to the water pump and blew that out, removed water drain pump, that... |
| Forum Info | Contact Info | |
|
Join Date: 11-19-2007
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|