| Register | FAQ's | New Posts | Today's Posts | Extras |
| » jgiza25 |
| View Profile: jgiza25 | |||||
|
|||||
|
Go figure, unhooked all the leads to the control board (including the door latch switch) and put it all back together. Now working fine (for now). We'll see. This will keep me from buying the 300... |
|
Gene, I was using the tech sheet from your link above to Richard under "Checking Keypad Operation". That procedure has you disconnect the keypad pin connection from the control as I mentioned,... |
|
Gene, Thanks for the help. Yes my symptoms were the same as Richards, but when I went through the tech sheet procedure, the control did not respond by turning on the drain motor. According to the... |
|
Sorry, the "P" should be a "D" so its KUDC25CHSS1 . The unit is a stainless steel model, the console is stainless steel and the inlaid keypad is black. The control panel inside has a gray plastic... |
|
Gene, I have an older model Kitchenaid (KUPC25CHSS1) with the same symptoms as RKing11. I pulled the keypad ribbon, turned on the power then shut the door w/ no response on the drain motor. Can... |
| Forum Info | Contact Info | |
|
Join Date: 08-10-2008
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|