 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » jaz2924 |
| View Profile: jaz2924 | |||||
|
|||||
Dryer won't start - help - Ordered the part and thank you for the helpI checked and cleaned the entire air flow system internal and external. clump of lint on the broken thermal fuse thank you for the help :) |
|
Dryer won't start - help - Working but Can't find the replacement part what is broken is a thermal fuse by the exhaust. It is shown in the attached picture with the white back and the violet leads. It does not measure 0 ohms and when I jump it the dryer runs fine. ... |
|
Range - Need help with broiler - Working but Can't find the replacement part tested thermal fuse and saw 0 ohms tested broil element and got 0 ohms tested broil element and it had 0 v when in broil mode tested power and had 240 to left 120 middle, and ground. tested bake... |
|
Range - Need help with broiler - Whirlpool Range RF362LXTS2 :) Thank you for your help. The stove top and the bake element run perfectly. Checking the thermal fuse. For broiler element to operate correctly what Voltage difference should I see at the... |
|
Range - Need help with broiler - Range - Need help with broiler broiler doesn't work. Tested connectors on back and got 0 volts. tested element which is new and it was fine..... It was ~40 ohms:) |
|
Dryer won't start - help - Dryer won't start - help :) Dryer won't start. It has power. The door switch works and the push button works. help |
| Forum Info | Contact Info | |
|
Join Date: 01-28-2013
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
