 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » jayp |
| View Profile: jayp | |||||
|
|||||
Kenmore Elite Range error code helpThis is the final follow up just to complete the thread and maybe help someone else some day. Raplacing the touch pad did cure the problem so it seems it was shorted with a key depressed some place... |
|
Kenmore Elite Range error code help The part has been ordered so not installed yet, so now I am getting worried. But when the stove was in error I held a hair dryer over the left side on the touch pad and after about 3 minutes the... |
|
Kenmore Elite Range error code help I finally had to call a technician and he said the F7 is a touch pad problem like a short in it from one of the cooking elements, the oven would work ok without any errors. So unfortunately the part... |
|
Kenmore Elite Range error code help oh and the oven was at room temp also, as I have not used the oven in a few days now. |
|
Kenmore Elite Range error code help No I just unplugged and checked it across the probe itself, I am not sure where it plugs into the board at. |
|
Kenmore Elite Range error code help When I got the error code I quickly unplugged the sensor probe and the reading was under 1100 ohms, I did this 5 times with the same result so it appears the sensor is good. Any other suggestions... |
|
Kenmore Elite Range error code help I replaced the controller and it worked for 2 days then the F10 and F7 error codes returned intermittently. I checked the oven temp sensor and it measured 1.08K ohms and that seems ok. So I am... |
| Forum Info | Contact Info | |
|
Join Date: 06-12-2009
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
