 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » JavaG66 |
| View Profile: JavaG66 | |||||
|
|||||
No agitate or spin, pump OKI suppose this is decision time for me. Yellow=>Blue: 10.1v Yellow=>Violet/W: 9.8v It looks to me like a double whammy. Appliance Parts Pros has a very generous return policy and I suppose I could... |
|
No agitate or spin, pump OK I want to commend you on your concern for safety; I work at a site that preaches it till we are all sick of it. But it's a good thing not to get hurt. So continue offering you cautions in red and... |
|
No agitate or spin, pump OK "You should do the checks with the motor connected." Revised readings, motor connected: For the main & start windings, respectively, Test position 5: 9.7v & 1.1v 27v & 3v Test position 6: 14.7v &... |
|
No agitate or spin, pump OK "To clear the error code, while in error check mode, press the start button. This will clear all codes." Simple enough; I like simple. "Yours is the older T model design." As in those black... |
|
No agitate or spin, pump OK Clear the error and see if it returns, could just be a fluke. How? I think I read somewhere here about raising the lid a dozen times, but that didn't clear the error. The red wire is only going to... |
|
No agitate or spin, pump OK - No agitate or spin, pump OK First of all, thanks to all you seasoned guys that offer your help! Here's what I know: All LEDs work in the Field Service Mode. In position 2, "Error code-slow pump" is indicated. Positions 5, 6 &... |
|
GE washer will fill and drain but no spin/agitate - No agitate or spin, pump OK Is there a similar fuseable link for a WLSE3150A0WW? I couldn't it find on on the White/Red wire up front; maybe in the control section? Same symptoms. I have a bad motor, but I wanted to make sure... |
| Forum Info | Contact Info | |
|
Join Date: 01-29-2013
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
