| Register | FAQ's | New Posts | Today's Posts | Extras |
| » jamh |
| View Profile: jamh | |||||
|
|||||
|
Certain models are covered by manufacterer with the c1 error code, call whirlpool. Thanks James |
|
control transformer smoked, installed new transformer and it smoked. I have 120 volts from control to transformer but only .023 volts coming from transformer and should have 20 volts from... |
|
Display is beeping and flashing error code CE. Tempature is 0-5 degrees. What do i do. |
|
Chk voltage at water valve when unit should be filling with water, should be 120 volts. If no voltage replace control. If you have voltage then there is a problem with your water supply. |
|
If heater is good and you replaced the control all you have left is the defrost thermostat. |
|
Are you installing the o-rings the same way they where on the old one. |
| Forum Info | Contact Info | |
|
Join Date: 03-08-2011
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|