| Register | FAQ's | New Posts | Today's Posts | Extras |
| » J.T. |
| View Profile: J.T. | |||||
|
|||||
|
Thank you for your sound advise. I was able to get the motor loose from the back of the blower housing and discovered the squeaking bearing. After a few doses of 3-in-1 oil, it's good as new. At... |
|
Thanks for the info Denman. If there is no "slop" in the drive shaft do you think oiling the shaft and bearings would be enough? I would hate to put it all back together and a couple of days later... |
|
Update. I have been able to remove the blower. When I turn the motor shaft the squeaking appears to be coming from inside the motor. Please, anybody have any suggestions? |
|
I have accessed the blower, removed both clamps. Part of the blower hub was broken into pieces. The blower will not slide off the shaft. Shouldn't it slide right off? It appears that hub has... |
|
I have a Maytag gas dryer. Under power and when I turn the drum manually a loud squeaking noise comes from the blower fan and motor. I removed the belt from the drum so I could turn the blower by... |
| Forum Info | Contact Info | |
|
Join Date: 10-26-2009
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|