| Register | FAQ's | New Posts | Today's Posts | Extras |
| » iraslotnick |
| View Profile: iraslotnick | |||||
|
|||||
|
Thanks. You have the correct Model. Sorry about that. Questions: 1) if the windings test badly does that mean I need to replace motor? 2) How do I access motor? Is motor accessable from the front -... |
|
Model No KUDS01JSP0. Water entering fine and draining fine but skips wash cycle. Tried replacing Control Panel but wash cycle still does not work. Ideas? |
|
Water entering fine and draining fine but skips wash cycle. Tried replacing Control Panel but still does not work. Ideas? |
|
Model KUDS01JSP0 Power works. Water enters and drains. However, wash cycle never starts. There are 5 lights on the front. Light 1 'SensingRinse' works Light 2 'Add A Dish' works Light 3 'Heating... |
|
We had some leaking on floor. Discovered door gasket was loose on right side. Sticking it back in the slot it went down to the bottom. Noticed that the left side is longer and the end sticks onder... |
|
Thanks Gene. Where does the Thermal cut-off connect? The diagram does not show this. To the front of the back panel? To the back of the oven casing? Not clear. |
|
Also is the part the same for upper and lower ovens? My problem is with the lower oven. Thanks. |
| Forum Info | Contact Info | |
|
Join Date: 11-30-2008
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|