Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > View Profile » hospitalityusa

View Profile: hospitalityusa
hospitalityusa is on a distinguished road
hospitalityusa hospitalityusa is offline
Junior Member
 
Last Activity: 03-01-2014 11:33 AM 

Microwave, tried everything - bad Magnetron?
In my case it turnout to be bad Diode. When i tested diode using 9 v battery/multimeter, it tested correctly however, only odd thing was that black paint like coating was on leads so i changed...
microwave runs perfectly but does not heat
Wanted to let others know, hoping it will help others.
In my case it turnout to be Diode.
When i tested diode using 9 v battery/multimeter, it tested correctly however, only odd thing was that ...
Transformer secondary winding resistance
Wanted to let others know, hoping it will help others.
Basically, Simon is correct that The hi- voltage winding to the ground - 50-70ohms not 0 ohm as stated in kitchenaid repair/service manual.
In...
Transformer secondary winding resistance
i have similar problem with KitchenAid microwave KEMC308SS04.
Question on transformer secondary testing... it shows 70 to 80 ohms between white and Chesis.
Repair manual claims it should be 0....
microwave runs perfectly but does not heat
i have similar problem with KitchenAid microwave KEMC308SS04.
Question on transformer secondary testing... it shows 70 to 80 ohms between white and Chesis. Repair manual claims it should be 0....
Microwave, tried everything - bad Magnetron?
Seems like you had ordered both part but only replaced Magnetron?
What was the end solution ?
Reason i am asking is that I have KitchenAid Microwave/overn combo and everyng seems to work fine with...
Forum Info Contact Info
Join Date: 01-23-2014
Posts
Total Posts: 6 (0.03 posts per day)
Last Post:
Microwave, tried everything - bad Magnetron?
01-27-2014 09:15 AM
Find all posts by hospitalityusa
Find all threads started by hospitalityusa
Referrals: 0
hospitalityusa has no contact information.
Additional Information Group Memberships
N/A
hospitalityusa is not a member of any public groups


All times are GMT -7. The time now is 09:15 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17