 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » homerepairbyneed |
| View Profile: homerepairbyneed | |||||
|
|||||
KitchenAid Dishwasher won't power upI jumped the connections out of the thermal fuse (black/white wire and black wire) and the power comes up. So it must be the thermal fuse. Thanks for your help |
|
KitchenAid Dishwasher won't power up I ran the tests and I'm a little confused. The P8 test showed no voltage. The P2 test shows no voltage. The Black wire on the back of the thermal fuse shows good voltage. |
|
KitchenAid Dishwasher won't power up that's what I figured but I wanted to be sure. I'll get back to you. Thanks for your help. |
|
KitchenAid Dishwasher won't power up Hate to ask this, but where is a chassis ground to do the live test. I had been doing live tests on just about every component earlier, but not those. What do I use for a ground? |
|
KitchenAid Dishwasher won't power up That is one of the two parts that arrived today and was replaced. I get around 120v through the fuse, so I don't know what else to try. Could the replacemnt interface I got be bad? The door switch... |
|
KitchenAid Dishwasher won't power up - KitchenAid Dishwasher won't power up Kitchenaid model KUDS01FLBL1. Went to run it last week and no lights on panel and no operation. Checked power to and through the fuse and that's good. Ordered new Control Panel and Interface.... |
| Forum Info | Contact Info | |
|
Join Date: 02-03-2011
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
