| Register | FAQ's | New Posts | Today's Posts | Extras |
| » HHB |
| View Profile: HHB | |||||
|
|||||
|
Just did some more testing, and I think I'm getting closer to the issue. I checked the resistance of the windings in the motor, all were the same at a little over 7 ohms. So for the heck of it, I... |
|
Thanks Gene. I took a look at the schematic and saw that there are 3 switches in series, the upper and lower tub displacement as well as the inertial unbalance switch. So I disconnected the lower... |
|
Thanks Gene. I removed the connectors on the machine control board before taking it out for inspection, and I removed the power connector and the JP4 connectors on the motor control board to do the... |
|
Thanks for the reply Gene. Are there any known connection points on this machine that cause issues? Also, would any of the micro or out of balance switches cause this issue? I ask because when I... |
|
Our Maytag Neptune stackable washer fills, then shuts off after a minute or so. When we advance the timer manually, it will drain, and then shut off again. It never agitates or spins. After some... |
| Forum Info | Contact Info | |
|
Join Date: 12-05-2012
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|