 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » gunns |
| View Profile: gunns | |||||
|
|||||
Repair ManualParts get ordered from you guys tomorrow! Thanks for all the info and your time. I'll let you know how it turns out! |
|
Repair Manual Well, I had too much time on my hands so I pulled the pump/motor. The front bearing was dragging so I sprayed some penetrating oil on it and freed it up. I know this is a temporary fix. I just wanted... |
|
Repair Manual Gene, I'm guessing that the circulation pump is located between the main (large 3-4" in diameter) motor and the chopper assy. I think I can here it running. Is it possible that the circulation pump... |
|
Repair Manual Well Gene……. I put the thermostat back in and pushed the buttons you advised and it’s still not working. You stated to push the following - High temp (Power scour) - Air dry (No heat dry, Energy... |
|
Repair Manual Thanks Gene for the info. I hope to get it all back together soon and I'll try the reset. My fingers are crossed!! |
|
Repair Manual Gene, I located the thermostat and the resistance checked out at .3 ohms. Is that a good reading for it? I found another possible cause for the washer not running. The connector tip on one of the... |
| Forum Info | Contact Info | |
|
Join Date: 12-05-2012
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
