| Register | FAQ's | New Posts | Today's Posts | Extras |
| » gregg |
| View Profile: gregg | |||||
|
|||||
|
Thanks, it should be either a broken bracket or the switch, from my limited experience, however the bracket is not broken [it is very corroded under the bottom] and the switch is not theproblem. Just... |
|
Hello, my ice machine is stuck in a cycle. the water continually runs over the tray, it will not cycle in or out. The bracket under the tray is not broken. I tried replacing the ice thickness switch... |
|
I have a kitchenaide ice maker, under the counter and it is giving me fits. It is stuck in a cycle. [water continually runs over the tray and the ice builds up. I know if the bracket brakes that... |
|
Mike, these things can be tricky and aggravating. the water inlet valve was the answer for mine. They get dirty and do not work properly. If the pump is sucking air then it is not getting water. The... |
|
Thanks, yes into the condensor, I got it, that was so easy, It did not take long at all to complete that project. I work on all the ac units where I work, but we dont have split units there and we... |
|
I am changing a evap coil in my house and the tank I was going to use to recover my freon has some already in it [clean] and I did not want to mix it if the oils were different. I could pump the... |
| Forum Info | Contact Info | |
|
Join Date: 08-04-2008
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|