 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » greenchair |
| View Profile: greenchair | |||||
|
|||||
replacing bearing on washing machine Kenmore - racketIf your washer is over 3 years old you may find that the spider gear is corroded through. Taking the washer apart is a big job but there are some good guides to help you do it. I replaced mine... |
|
replacing bearing on washing machine Kenmore - ohhh...I see I am guessing you want the bearings on hand before you take your rig apart. Is that correct? I will dig around but can't now at work. Why do you think it needs bearings? Is it making squealing... |
|
replacing bearing on washing machine Kenmore - bearings... Bearings and seals are pretty standard. Drop into a place that sells bearings. The will match yours by number or by measuring them with a vernier. The should also have a seal also that will... |
|
Spider support - increase life - Powder Coating. Sure, I will probably pull it apart in a year to check it out. I do believe that the powder coating is not brittle like a baked enamel or ceramic and should hold up well. Time will tell. Before... |
|
Spider support - increase life - Powder Coat ? Also, Although I have spent enough having to buy this part and high quality bearings, I am going to splurge another 50 bucks and have the spider support powder coated. It seems to be the finish of... |
|
HE3t stainless inner tub problem - Ho humm... Thanks for the input. The Sears people keep asking about HE soap but not using it or having hard water is not a valid excuse for poor design as you probably agree. Past products used steel to... |
|
HE3t stainless inner tub problem - Spider Arm So they are STILL making this part to fail? Also, I don't really see how HE soap makes a difference. The sears salesman just told us to use 1/4 of the soap we would normally use in liquid. |
| Forum Info | Contact Info | |||
|
Join Date: 05-19-2009
Referrals: 0
|
|
|||
| Additional Information | Group Memberships | |||
|
|
