Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > View Profile » GlennFord

View Profile: GlennFord
GlennFord is on a distinguished road
GlennFord GlennFord is offline
Junior Member
 
Last Activity: 07-14-2013 02:25 PM 

Kenmore Ultra Wash Motor Replacement - need Serivce manual
http://forum.appliancepartspros.com/attachments/dishwasher-repair/6033d1366753884-kenmore-ultra-wash-motor-replacement-need-serivce-manual-dw-pictures-001.jpg


Gene;

Thanks for all your help in the...
Kenmore Ultra Wash Motor Replacement - need Serivce manual
Gene:

Thanks for getting back to me. I did install the large gasket as shown in your above picture. Well, I guess the pump is seated OK, the DW is running and no leaks.

Can you please help me...
Kenmore Ultra Wash Motor Replacement - need Serivce manual
Gene:

I have attached a picture of the motor & pump assembly installed in the DW tub. I just do not see any contact by the tabs to the tub, only to the above pump. The DW is going through several...
Kenmore Ultra Wash Motor Replacement - need Serivce manual
Gene:

Yes, I did move the white rubber tabs 90 degrees. But, the tabs are not used to secure the motor & pump assembly to the tub only the motor to the pump assembly. The motor and pump assembly...
Kenmore Ultra Wash Motor Replacement - need Serivce manual
Gene:

I have installed a used pump and motor. I rotated the timer through various cycles while the DW was on the bench with temporary wiring and the motor responded and I believe it is working...
Kenmore Ultra Wash Motor Replacement - need Serivce manual
Gene:

Thanks very much for your informative reply - very helpful.

I was wondering if there may be available a Kenmore service manual on line for this DW as I have seen for other DWs?

Thanks...
Kenmore Ultra Wash Motor Replacement - need Serivce manual - Kenmore Ultra Wash Motor Replacement - need Serivce manual
I believe my motor on my Kenmore dishwasher is bad. It will hum for only a few seconds and then cut off. The Timer seems OK. I need detailed instructions with pictures to pull it out. Can anyone...
Forum Info Contact Info
Join Date: 04-14-2013
Posts
Total Posts: 7 (0.01 posts per day)
Last Post:
Kenmore Ultra Wash Motor Replacement - need Serivce manual
04-14-2013 02:03 PM
Find all posts by GlennFord
Find all threads started by GlennFord
Referrals: 0
GlennFord has no contact information.
Additional Information Group Memberships
Location:
McDonough, GA
Occupation:
Retired
GlennFord is not a member of any public groups


All times are GMT -7. The time now is 08:15 PM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17