Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > View Profile » Gary/APP Team

View Profile: Gary/APP Team
Gary/APP Team is on a distinguished road
Gary/APP Team Gary/APP Team is offline
Expert
Gary/APP Team's Avatar
Last Activity: 04-24-2012 08:34 AM 

Signature
Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here.

Intermittent Flame
Hello . There are a couple things to check here.
Using a clamp on Amp meter, test for 3.2-3.6 amps on one of the igniter wires. With the igniter turned on, this is the correct amperage .You can use...
Maytag drum wear on glide surface
Hello. I would leave the drum as is, but I would check the drum rollers in the back of the drum, normally these will need replaced at the same time,these are the parts that get all the wear and tear....
Dryer heats for 2 minutes then gets cold
Hello . I would Check the coils, and see if they test good. You can test the coils using a multi-meter, The two prong coil will read 1,000-1,300 ohms, and the three prong coil will read 1,300-1,400...
during spinning drum gets out of balance real bad
Hello . It sounds like the snubber is worn, and will need replaced.

AP4024496


PAV2300AWW
kenmore washer not spinning
Hello Soccerbob. Based on the information given ,I would say yes the drain kit would fix it , I would also replace the clutch assembly while you have it torn down, Thank you

AP3018165
AP3094537
...
washer will not drain
Hello . It sounds like the pump is either stopped up, or it needs replaced, you can check the pump with a multi meter, to see if there is voltage to the pump while in drain, if there is voltage...
GE HYDROWAVE noisy spin
Hello. The roaring sound is most likely coming from the tub bearing where the mode shifter comes thru the tub seal this can be replaced, Thank you

AP2045289
AP3156169
AP4324356


WJSR4160G1WW...
Forum Info Contact Info
Join Date: 10-21-2011
Posts
Total Posts: 123 (0.12 posts per day)
Last Post:
GE HYDROWAVE noisy spin
03-30-2012 07:41 AM
Find all posts by Gary/APP Team
Find all threads started by Gary/APP Team
Referrals: 0
Additional Information Group Memberships
N/A
Gary/APP Team is not a member of any public groups


All times are GMT -7. The time now is 12:55 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17