 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » fyao |
| View Profile: fyao | |||||
|
|||||
Dual Infinite Switch WiringGene, Joe, and all who have helped: For the 6 inch single burner (right rear burner for J/A cooktop CVE3401B) I purchased part #74011242. It is easy to replace and there is no problem for the screw... |
|
Dual Infinite Switch Wiring Thank you, Gene. That was what we thought. We were just a little concerned that there might be live wire underneath. It seems we would be OK. Thank you again. FYao |
|
Dual Infinite Switch Wiring Good morning, Gene. The switch arrived and the installation was real straight forward (exact wiring scheme). However, there is one problem: the off position of the switch points to the three o'clock... |
|
Dual Infinite Switch Wiring Thank you very much, Gene. The information was given to me by a local parts store. They told me that both the right front and the right rear burners use the same switch. I will get the new part and... |
|
Dual Infinite Switch Wiring Thank you, Gene. However, my original connected wires do not have a single red wire. According to the instructions, we should seprate the double red wire and connect the seprated red wires to P2 and... |
|
Dual Infinite Switch Wiring - Additional information on the original wiring My original wiring shows: One single black wire connected to H1 and one single black wire connected to H2 (the two look like equivalent of Yellow wires on the diagram). Then one black wire from the... |
|
Dual Infinite Switch Wiring - Additional information on the original wiring I am new to the thread and do not know if anyone is continuing monitor it. I also have a CVE3401B but am trying to replace the switch for the Right Rear small single burner. I followed the... |
| Forum Info | Contact Info | |
|
Join Date: 01-04-2013
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
