 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Flannthered |
| View Profile: Flannthered | |||||
|
|||||
"element on" light stays on - "element on" light stays onThe light indicating "element on" stays lit even though everything is turned off and cool. I think I had this happen before and the repair guy lifted the range top and tapped a few things and the... |
|
Dial feeling stiff - Dial feeling stiff I've got a Fisher-Paykel Elba electric dryer less than 4 yrs. old but heavily used. The selector dial feels a little stiff lately and I thought I'd start looking into timers in case it goes. Any... |
|
water forming on rear of fridge - water forming on rear of fridge On the back of this refrigerator, there is a black plastic fitting, apparently behind the control panel. A tube leads from this fitting down to an evaporator tray. Water is forming around the... |
|
Basic Headscratcher - Figured It Out I found the hidden catches. Facing the AC, after removing the cover and filter and taking out the four screws, look inside the right side frame and there are two plastic latches. Push hard with... |
|
Basic Headscratcher - Basic Headscratcher I've got severe mold build-up behind the louver at the top of this window AC. Would like to clean it out but can't figure out how to remove the panel surrounding the filter. There's four obvious... |
|
rinse agent not dispensing - rinse agent not dispensing Rinse agent reservoir is staying full as if not being used. The float indicator moves as the door is raised and the liquid appears to rise if the cover is removed and the door slightly raised. I... |
|
"Element on" indicator stays on - rinse agent not dispensing Thanks. Is it something I could fix myself (knowing nothing from the start)? If the contacts of an element were fused, would the element itself stay hot? That's not happening. |
| Forum Info | Contact Info | |
|
Join Date: 01-04-2011
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
