| Register | FAQ's | New Posts | Today's Posts | Extras |
| » fixyourboard |
| View Profile: fixyourboard | |||||
|
|||||
|
I posted a blog on this recently over on appliancejunk.com/blog, here's the link: http://... |
|
I think it's not likely to be the controller, more likely a worn out ignitor. |
|
We see this symptom fairly often due to a failure in the electronic clock/control (ERC). In this case part number 3148560. We test and repair oven controllers at www.************************.com... |
|
Based on your description of the symptoms I would say that about 21 degrees of the discrepancy is due to your temperature sensor (should read 1100 ohms @ 80 F). The rest of the error is likely due to... |
|
If you unplug the sensor from the control board you can measure its resistance at room temp ... should be about 1090 ohms at 70 F. Here's a link to the tech sheet if you don't have... |
|
First you should check the temperature sensor. If the sensor is reading abnormally hot it may explain the symptoms ... controller thinks the oven is very hot so it keeps the fan on and locks the... |
|
First I would check for an intermittent power connection. Wiggle the power plug, flip the breaker on and off... Do you get the same symptom if you cycle the power by turning off and on the circuit... |
| Forum Info | Contact Info | |
|
Join Date: 07-29-2009
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|