 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » fastrat37 |
| View Profile: fastrat37 | |||||
|
|||||
Dryer only runs when start button is pressed - Success!!The new circuit board or electronic control assembly arrived this evening, tore apart the control panel, removed the bad one and install the new one.........it works!! :D We are back in... |
|
Dryer only runs when start button is pressed - Success!! I just ordered the part from App. Parts Pros........with shipping, the order was under $61.00.........I really didn't have $325.00 for a new dryer or their inflated part price@ Sears......I sincerely... |
|
Dryer only runs when start button is pressed - Success!! Went to the Sears parts store and researched the electronic control assy. It is $121 plus shipping and not in stock, so I am going to be into this repair half the cost of a new dryer at... |
|
Dryer only runs when start button is pressed - Success!! To get to the motor relay to check for the 48 vdc, how much of the dryer do i take apart? I can see part of the motor looking in thru the bottom access panel behind the duct work.........do I take... |
|
Dryer only runs when start button is pressed - Success!! I have tried to perform the "Factory Test" as per the tech sheet.......it will not enter the "Test Mode" and NO beep is heard......is this any indication of an Electronic Control Assy.... |
|
Dryer only runs when start button is pressed - Success!! I already have a Fluke 83 so I will start testing components as I go through the Tech sheet tests............stay tuned. |
|
Dryer only runs when start button is pressed - Dryer only runs when start button is pressed this dryer has had this symptom since we bought it. When it first started to "act up" it would start working after it had time to cool off it seemed. then it would work normally, but now it has... |
| Forum Info | Contact Info | |
|
Join Date: 03-18-2009
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
