furnace problem!!!! - be sure
be sure the fan wheel is secured to the motor , motor turns freely. If you find a problem with it . like blower wheel damaged or stuck in housing , most likely u will have to replace : fan wheel ,...
|
dehumidifier - put a new switch
I would move the switch at the entrance of the crawl space were it can be easy to turn it on or off , just run a wire from the main to the switch , back to the main . be sure to have tight...
|
can anyone help - put a new switch
see how to check continuity in other posts....each part that need to be checked ...need to isolated....
|
can anyone help - continuity check
Put your meter in continuity or ohms ( U Inverted ) and when the meter leads are separeted reading must be Infinity or open line (OL) or zero. CHeck your Heater element , must give you a number, but...
|
|
|
Furnace Not Igniting Quickly? - t/shoot
Turn off the power at the furnace, jump w -r ( white wire to red ) that comes from t/stat, (24 volts) , colors may not match but terminals in unit , yes so jump w-r...... T/stat must be in off...
|
Water Leak behind blower motor - condensing furnaces
water is formed as product of combustion , but this water is discharged in a diferent line because is to acidic, straigh to the drain , his problem is a flooded air handler ; if he is not using a/c...
|
All times are GMT -7. The time now is 02:01 PM.
The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc.
