| Register | FAQ's | New Posts | Today's Posts | Extras |
| » englaisfitz |
| View Profile: englaisfitz | |||||
|
|||||
|
Absolutely nothing. No power surge, no hum, no buzz, no movement, nothing. |
|
Can I bypass that whole red wire by connecting the black to the capacitor terminal itself? |
|
How do I double check the motor windings? I checked the switch after this past time, having already cleaned it, then using it again, I feared the same blackening, but no, the switch was clean. I had... |
|
Unfortunately, when I put everything back together, we had the same problem, I can start it by hand, but it won't start on it's own. So I took it apart again, inspected the switch, and everything... |
|
Eric, You are a genius!!! I took the switch apart, removed the two switch terminals, they were black as... well, burned electrical connections! I took a wire brush to them, then wiped them clean,... |
|
Alas, there is no tech sheet or wiring diagram anywhere on the machine, nothing on the case, nothing anywhere near the controls, nor on the body itself. I can take a photo of the existing switch, so... |
| Forum Info | Contact Info | |
|
Join Date: 04-20-2011
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|