| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Ekauserud |
| View Profile: Ekauserud | |||||
|
|||||
|
It looks as though the leak is coming from the transmission case. When small loads are done it doesn't leak or not nearly as much. I am angry because I JUST replaced all the seals. |
|
Hi all, and thanks again! I just replaced the ENTIRE guts of my washing machine. It ran perfect until now. There is a leak on the floor on the right side(half) of the machine soaking the floor. ... |
|
Bought a brand new timer. Still won't spin. I have the motor out of the machine and am holding the lid switch closed it just hums still. Brand NEW MOTOR, CAPACITOR, and TIMER! what else could... |
|
Is there any way someone can tell me to check the timer??? and what problems can the pressure switch incur??? |
|
Can you tell me or point me to what the timer is. What seems like a timer in mine looks fine. Where can I put ohm meter to test these parts? Also the pressure switch is discontinued? So I am just... |
|
there's definitely a hum from the motor, it won't start. it will however start when I manually do it, spin it that is. I have to hold on the lid switch and have it set properly and it just hums in... |
|
I edited my previous post and included a picture. Any help with the contact on the picture being my problem would be great. I now own a VOM. If I could be pointed in the right direction I could... |
| Forum Info | Contact Info | |
|
Join Date: 10-07-2012
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|