| Register | FAQ's | New Posts | Today's Posts | Extras |
| » edm812 |
| View Profile: edm812 | |||||
|
|||||
|
Reinstalled dryer today. Heats up to where the door is pretty hot with no clothes in it. Put a "normal" (small) load of clothes in and it took 3 cycles to dry and the door didn't get very warm. ... |
|
I didn't take the blower assembly apart. There was nearly no lint in the wheel discharge tube. I ran it after reassembly and it has excellent force. Can there be a problem in the blower assembly... |
|
Thanks Gene. During disassembly, I discovered the two electrical items that are attached to the blower housing. Can you tell me how to check continuity? The numbers on one are HTR120V69TK11, ... |
|
Have a 110 volt dryer with little to no heat. Have to do 3 cycles to get items dry. Occassionally, it will get very hot. Have checked and confirmed continuity on the "coil springs" and also on 2... |
|
Thanks Gene for your help!! Will checking for concentricity reveal the working condition of the element? Thanks again Ed. |
|
This is to revise my earlier post. The correct model number for the GE dryer is DSKP333EC. Thanks again. Ed. |
|
Have the above mentioned dryer in our RV. It is a 110V. Dryer does not produce heat "all" the time. While using the same cycle and same load, may have to run 3 cycles. Sometimes, the dryer does... |
| Forum Info | Contact Info | |
|
Join Date: 04-14-2009
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|