 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Earl Dryer |
| View Profile: Earl Dryer | |||||
|
|||||
Voltage different from neutral & GroundIcehouse, you are exactly right on 3 wire systems and potential differences of such systems, that is why you sometimes get shocked when you touch a neutral and something grounded. I just thought it... |
|
Voltage different from neutral & Ground Well folks, I don't know how all the attention got to the transformer, I know it is bad. I disconnected it and ohmed it, the secondary is open the primary showed some resistance (don't recall how... |
|
Conversion from NG to LP - Conversion from NG to LP Is there anything other than orfice change outs necessary to convert a Whirlpool conventional Range to LP gas. I was told that the regulator needed to be changed out but I don't see why that would be... |
|
Voltage different from neutral & Ground - Conversion from NG to LP Yes, you are missing something, you did not read all of the post. I said that I had the low voltage to ground on L1 not L2 and the 2ndary winding was open. I do not know what the low voltage is... |
|
Voltage different from neutral & Ground - Conversion from NG to LP Those readings were normal, That is why I was Questioning posibily the suppressor or filter circuit maybe the culprit as far as the readings to ground. I know that the low voltage transformer is bad,... |
|
Voltage different from neutral & Ground - Conversion from NG to LP Maybe that what the problem is, this transformer is missing the rectifier circuit to convert the the low voltage AC Give me a break any rectification is going happen on the board. FYI The Voltage on... |
| Forum Info | Contact Info | |
|
Join Date: 04-28-2008
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
