 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » dlhord |
| View Profile: dlhord | |||||
|
|||||
Whirlpool Duet Steam Dryer had water in vent hoseGene, Ran the diagnostic and found error codes F25, F30 and F25. Ran Test #9 and light water found inside on the drum. Guess it is working ok now. For error #25 (Inlet Thermistor/High Limit... |
|
Whirlpool Duet Steam Dryer had water in vent hose Thanks Gene. I will check/confirm everything as you have suggested. One additional question if it turns out to be the water valve. Can I just disconnect the water line to the dryer so I can use... |
|
Whirlpool Duet Steam Dryer had water in vent hose Answers to your questions are shown above. Thank you in advance for your assistance. |
|
Whirlpool Duet Steam Dryer had water in vent hose - Whirlpool Duet Steam Dryer had water in vent hose Whirlpool Duet Steam Dryer had water in vent hose. Noticed clothes were not drying recently. Today smoke alarm went off in utility room. Turned dryer off, unplugged, burning smell inside the... |
|
Dishwasher stuck on China wash cycle. Display lights and time not showing. - Dishwasher stuck on China wash cycle. Display lights and time not showing. :( Ordered and replaced the board in the door today but problem is even worse. No light show up now. I guess I will replace the control (select Wash/Dry cycles) on the door next. Any other ideas?... |
|
Lights in fridge and control unit LEDs out, now icemaker stopped working - Update: Lights in fridge and control unite LEDs out, now icemaker stopped workding :) Replaced control board and all lights are now working in the fridge plus the LEDs are lit. I will wait a few days to make sure everthing keeps working before ordering and replacing the... |
|
Lights in fridge and control unit LEDs out, now icemaker stopped working - Update: Lights in fridge and control unite LEDs out, now icemaker stopped workding Outlet is good. Fridge and freezer (light works in freezer) work good other than stated problems. Good power coming to the icemaker at connection but when we checked the module voltage with a meter... |
| Forum Info | Contact Info | |
|
Join Date: 05-31-2009
Referrals: 0
|
|
|
| Additional Information | Group Memberships | |
|
N/A
|
|
