Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > View Profile » dh1200s

View Profile: dh1200s
dh1200s is on a distinguished road
dh1200s dh1200s is offline
Senior Member
 
Last Activity: 03-18-2016 04:07 PM 
Download vCard

Maytag Neptune load unbalance
Yes well done JPSeuropa!

Dick
Maytag Neptune load unbalance
Hi Paul,

Water over fill could be a stuck pressure switch or cold/hot water inlet valve stuck.

You are very much up to using Service Mode, I would check out if you can check/turn on and off the...
Maytag Neptune load unbalance
Paul,
Did you replace the TDS ,clean up 3 pin connector? Just curious what the fix was with TDS feedback to the Control Board to signal the Motor Control board to max 850RPM.

“” The...
Maytag Neptune load unbalance
Hey Paul,

Sounds like you did a great job replacing the Tub Seal/Outer Tub bearings. How free is the wash basket rotation? If you spin up by hand as fast as you can will it coast down to a stop...
Maytag Neptune load unbalance
Hello,

I know of no way to lock the Clutch Pulley. As you can see it’s a tight fit to get a 3/8” socket an driver on that 3/8” bolt and hold the Clutch Pulley with one hand and...
FAV6800A/FAV9800A Outer Tub bearing replacement
Sorry I no longer receive heads up e-mails for these post. Hope it all got worked out for you.....Dick
FAV6800A/FAV9800A Outer Tub bearing replacement
I found on mine when I pulled the replacement Tub Seal out of the package it was pressed into the new seal.

You removed the old sleeve from the Spinner Support shaft on tear down correct?

Pick up...
Forum Info Contact Info
Join Date: 03-07-2009
Posts
Total Posts: 457 (0.17 posts per day)
Last Post:
FAV6800A/FAV9800A Outer Tub bearing replacement
02-28-2015 09:05 AM
Find all posts by dh1200s
Find all threads started by dh1200s
Referrals: 13
dh1200s has no contact information.
Additional Information Group Memberships
N/A
dh1200s is not a member of any public groups


All times are GMT -7. The time now is 08:31 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17